• 3″ diameter single column tube
• available in Dining height, Counter and Stand-up Bar height
• 22″ round base plate, 50 lbs weight plate to stabilize your table
• Top steel plate, heavy duty
• 5 adjustable glides underneath base plate
• 3/8″ diameter threaded steel rod and nut for easy assembly
• Ballast plate is 3/8″ thick and powder coated
• Top steel mounting plate is 12″ x 12″ square
• can be cut to your custom height (additional charges apply)
• 3/8″ (10 mm) bolt head
• 304 grade stainless steel or powder coated black finish
• stainless steel finish like most appliances these days (not polished)
• This product ships within 72 hours

Most of our bases are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height.

This product ships within 72 hours from NC. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 3″ diameter single column tube
• 18″ round base plate, 40 lbs weight to stabilize your table
• Top steel plate, heavy duty
• 5 adjustable glides underneath base plate
• 3/8″ diameter threaded steel rod and nut for easy assembly
• Ballast plate is 3/8″ thick and powder coated
• Top steel mounting plate is 12″ x 12″ square
• can be cut to your custom height (additional charges apply)
• 3/8″ (10 mm) bolt head
• 304 grade stainless steel or powder coated black finish
• Sunray brushed (circular) finish on cover like many appliances these days (not polished)

This product ships within 72 hours from NC. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 3″ diameter column tube, 16 gauge (1.2mm) strong
• stainless steel material
• 300 lbs weight capacity – heavy duty for schools, Army bases and youth centers
• bottom steel plate is welded to leg column for maximum strength
• 7″ round flat bottom base plate, 0.35″ or 9 mm thick, 4 holes, 0.43″ or 11 mm diameter
• 12″ round cone shaped base plate
• Steel Top Plate is 12″ x 12″, bolted to leg, strong steel 0.1″ or 2.5 mm thick
• Unit bolts securely to any floor, 4 screw holes, 0.43″ or 11 mm diameter
• Leg has strong steel plates on each end, one welded, one bolted
• Great for Restaurants, Bars and Bistros
• 3/8″ (10 mm) countersunk fastener recommended
• Brushed stainless finish like any appliance these days (not polished)
• This product ships within 72 hours from NJ
• Single leg/base

• 3″ diameter column tube, 16 gauge (1.2 mm) wall thickness
• 304 stainless steel material
• 9″ round base cover, 1 1/2″ tall, stainless steel
• Top Plate is 12″ x 12″, made from cold rolled steel, 0.1″ (2.5 mm) thick
• Base can hold more than 250 pounds of downforce weight
• Steel floor plate bolts securely to any floor, 8 screw holes
• 1/2″ strong rod connect the base plate and the top plate with leg over it
• Great for Restaurants, Bars and Bistros long stand up table surfaces
• Base surface cover is 1 1/2″ high to give space for bolt heads
• Machine head bolts recommended
• Brushed stainless steel finish
• Single base
• Ships within 48 hours from NC

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height.

• 3″ diameter column tube, stainless steel material
• 7″ round flat bottom base plate, 0.35″ or 9 mm thick, 4 holes, 0.43″ or 11 mm diameter
• Top Plate is 12″ x 12″, bolted to leg, strong 0.1″ or 2.5 mm thick
• Bolts securely to any floor, 4 screw holes, 0.43″ or 11 mm diameter
• 1/4″ strong rod connects the base plate and the top plate (inside the leg)
• we cut these stainless steel bases exactly to your custom height (additional charges apply)
• 300 lbs weight capacity vertical load
• Great for Restaurants, Bars and Bistros
• Base surface cover 1/16″ thick, 304 grade stainless steel
• Bottom plate is only 1/2″ high off the floor
• 3/8″ (10 mm) countersunk fastener recommended
• Brushed stainless finish like all appliances these days (not polished)
• Single leg
• This product ships within 72 hours

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

This product ships within 72 hours. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)