• set of 4 legs 2 3/8 inch (60 mm)round diameter powder coated Black steel legs
• steel top plate is 3 1/2″ x 3 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• set of 4 black steel table legs
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• set of 4 legs 3 inch round diameter powder coated Black steel legs
• steel top plate is 4 1/2″ x 4 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• set of 4 black steel table legs
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• 3 inch round diameter powder coated Black steel leg
• steel top plate is 4 1/2″ x 4 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• single black steel table leg
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• 3″ diameter single column tube
• available in Dining height, Counter and Stand-up Bar height
• 22″ round base plate, 50 lbs weight plate to stabilize your table
• Top steel plate, heavy duty
• 5 adjustable glides underneath base plate
• 3/8″ diameter threaded steel rod and nut for easy assembly
• Ballast plate is 3/8″ thick and powder coated
• Top steel mounting plate is 12″ x 12″ square
• can be cut to your custom height (additional charges apply)
• 3/8″ (10 mm) bolt head
• Powder coated black finish
• This product ships within 72 hours

Most of our bases are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height.

This product ships within 72 hours from NC. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 3″ diameter single column tube
• 17″ round base plate, 40 lbs weight to stabilize your table
• Top steel plate, heavy duty
• 5 adjustable glides underneath base plate
• 3/8″ diameter threaded steel rod and nut for easy assembly
• Ballast plate is 3/8″ thick and powder coated
• Top steel mounting plate is 12″ x 12″ square
• can be cut to your custom height (additional charges apply)
• 3/8″ (10 mm) bolt head
• Powder coated black finish

This product ships within 72 hours from NC. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• strong Steel construction
• powder coated black finish
• 3″ round diameter
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• Foot is 2 3/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

Durable Powder coated glossy Black Finish
43″ height for bar and work surfaces
2 3/8″ diameter sturdy steel table legs
supports over 300 pounds
1 1/8″ height adjustable ABS foot
easy to install and include all necessary hardware
one single table leg
can be cut down to a custom length
This product ships within 72 hours from NC
Made in Italy
Click here for drawings

Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.