• set of 4 legs 2 3/8 inch (60 mm)round diameter powder coated Black steel legs
• steel top plate is 3 1/2″ x 3 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• set of 4 black steel table legs
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• set of 4 legs 3 inch round diameter powder coated Black steel legs
• steel top plate is 4 1/2″ x 4 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• set of 4 black steel table legs
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• 3 inch round diameter powder coated Black steel leg
• steel top plate is 4 1/2″ x 4 1/2″ with 8 holes for wood screws
• One inch height adjustable foot
• 250 pounds vertical load
• easy to install (wood screws not included)
• single black steel table leg
• this product ships from NC within 72 hours
• leg comes with a black ABS leveler

NOTE: These table legs are also available in custom heights. You can specify a custom table leg height!

• 304 Stainless Steel construction suitable for the Food and Health Industries
• 3″ round diameter
• optional floor bolt plate available (no adjustment)
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethelene foot
• Foot is 2 3/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 330 pounds vertical load
• These table legs are very easy to install (screws not included)
• Price is for one single stainless steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• strong ABS – 100 lbs capacity each
• 2 wheels
• brake
• sold in set of 4
• light duty only
• only fits our MILANO legs

• 3″ diameter column tube
• powder coated steel material
• black finish
• a steel rod inside the leg connects the floor plate and the top plate
• 6″ diameter flat cover plate, 3/8″ thick
• Top Plate 12″ x 12″, made from cold rolled steel, heavy duty
• steel floor plate is flat and 1/2″ tall
• can be cut to your specific height (additional charges apply)
• this base bolts securely to any floor, 4 screw holes
• Great for Restaurants, Bars and Bistros
• 3/8″ (10 mm) fastener recommended
• Single leg/base

This product ships within 72 hours. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 304 Stainless Steel construction suitable for the Food and Health Industries
• 2 3/8″ round diameter
• Steel top plate is 5″ x 5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• Foot is 2 1/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single stainless steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• strong Steel construction
• powder coated black finish
• 3″ round diameter
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• Foot is 2 3/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• strong ABS – 100 lbs capacity each
• 2 wheels
• brake
• sold by the each
• light duty only
• only fits our MILANO legs

• 3″ diameter column tube, 16 gauge (1.2mm) strong
• stainless steel material
• 300 lbs weight capacity – heavy duty for schools, Army bases and youth centers
• bottom steel plate is welded to leg column for maximum strength
• 7″ round flat bottom base plate, 0.35″ or 9 mm thick, 4 holes, 0.43″ or 11 mm diameter
• 12″ round cone shaped base plate
• Steel Top Plate is 12″ x 12″, bolted to leg, strong steel 0.1″ or 2.5 mm thick
• Unit bolts securely to any floor, 4 screw holes, 0.43″ or 11 mm diameter
• Leg has strong steel plates on each end, one welded, one bolted
• Great for Restaurants, Bars and Bistros
• 3/8″ (10 mm) countersunk fastener recommended
• Brushed stainless finish like any appliance these days (not polished)
• This product ships within 72 hours from NJ
• Single leg/base