• 304 Stainless Steel construction suitable for the Food and Health Industries
• 3″ round diameter
• optional floor bolt plate available (no adjustment)
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethelene foot
• Foot is 2 3/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 330 pounds vertical load
• These table legs are very easy to install (screws not included)
• Price is for one single stainless steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• 304 Stainless Steel construction suitable for the Food and Health Industries
• 2 3/8″ round diameter
• Steel top plate is 5″ x 5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• Foot is 2 1/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single stainless steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• strong Steel construction
• powder coated black finish
• 3″ round diameter
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• Foot is 2 3/4″ in diameter and has a 10 mm thread
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• 3″ diameter column tube, 16 gauge (1.2mm) strong
• stainless steel material
• 300 lbs weight capacity – heavy duty for schools, Army bases and youth centers
• bottom steel plate is welded to leg column for maximum strength
• 7″ round flat bottom base plate, 0.35″ or 9 mm thick, 4 holes, 0.43″ or 11 mm diameter
• 12″ round cone shaped base plate
• Steel Top Plate is 12″ x 12″, bolted to leg, strong steel 0.1″ or 2.5 mm thick
• Unit bolts securely to any floor, 4 screw holes, 0.43″ or 11 mm diameter
• Leg has strong steel plates on each end, one welded, one bolted
• Great for Restaurants, Bars and Bistros
• 3/8″ (10 mm) countersunk fastener recommended
• Brushed stainless finish like any appliance these days (not polished)
• This product ships within 72 hours from NJ
• Single leg/base

• 3″ diameter column
• 7″ round bottom steel plate is welded to leg for maximum strength
• powder coated steel material
• black finish
• 7″ diameter flat base plate, 3/8″ thick and powder coated
• Top Plate is 12″ x 12″, made from cold rolled steel, heavy duty
• Unit bolts securely to any floor, 4 screw holes (no bolts provided)
• Great for Restaurants, Bars and Bistros
• base can be cut exactly to your custom height (additional charges apply)
• 3/8″ (10 mm) countersunk fastener recommended
• 1 3/8″ bolt secures the top plate to the leg
• Single leg/base
• This product ships within 72 hours from NJ

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height.

For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 3″ diameter column tube, stainless steel material
• 7″ round flat bottom base plate, 0.35″ or 9 mm thick, 4 holes, 0.43″ or 11 mm diameter
• Top Plate is 12″ x 12″, bolted to leg, strong 0.1″ or 2.5 mm thick
• Bolts securely to any floor, 4 screw holes, 0.43″ or 11 mm diameter
• 1/4″ strong rod connects the base plate and the top plate (inside the leg)
• we cut these stainless steel bases exactly to your custom height (additional charges apply)
• 300 lbs weight capacity vertical load
• Great for Restaurants, Bars and Bistros
• Base surface cover 1/16″ thick, 304 grade stainless steel
• Bottom plate is only 1/2″ high off the floor
• 3/8″ (10 mm) countersunk fastener recommended
• Brushed stainless finish like all appliances these days (not polished)
• Single leg
• This product ships within 72 hours

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

This product ships within 72 hours. For example it takes 2 days to PA, NY, TN, KY, GA via UPS ground. 3 days to MA, IL, OH, IN, TX, FL. 4 days to CO, AZ, NM, WY and 5 days to WA, OR, CA (excluding weekends)

• 304 Stainless Steel construction suitable for the Food and Health Industries
• 3″ square diameter
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Leg is 1/2″ height adjustable with chrome plated cover over polyethylene foot
• This table leg can be cut to a custom length (additional charges apply)
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install
• Price is for one single stainless steel table leg

Most of our legs are imported and on our shelves ready to ship. Custom height means we can cut them down to your required height by cutting a longer stock leg short. For example: if you need a 29″ long leg, please choose the counter height 34″ leg and we can cut it down for you. If you need a 36 1/4″ tall leg choose a 40″ bar height leg and we cut it down to 36 1/4″ height. The foot is always compressed and can be adjusted to gain additional height.

• 304 Stainless Steel construction suitable for the Food and Health Industries
• 3″ round diameter stainless steel leg
• This table leg can be cut to a custom length (additional charges apply)
• Steel top plate is 6.5″ x 6.5″ attached with two 8 mm bolts
• Top plate is 0.16″ or 4 mm thick with 8 screw holes (0.24″ or 6 mm diameter)
• Floor mounting plate is 3.3″ or 85 mm in diameter, 0.4″ or 10 mm tall, all metal, chrome plated and has 3 counter sunk holes, 3/8″ in diameter
• This table leg is rated at 250 pounds vertical load
• These table legs are very easy to install (screws not included)
• Price is for one single stainless steel table leg

NOTE: This leg can not be used for free standing structures! Use only if your table top is secured to a wall or cabinetry. This is a “kick prevention” solution.

2” square diameter leg
403 grade Stainless Steel material
Steel Top plate 3.5″ x 3.5″, 0.12″ or 3 mm thick, powder coated, two 0.3″ or 8 mm bolts
1/4” height adjustable foot, 1.5″ diameter, chrome plated, 10 mm thread
200 pounds weight capacity
2 bolts to secure top plate to prevent twisting, 0.3″ or 8 mm diameter bolts,
sold by the each